How To Do Daily Maintenance for The Auger Filling Machine

    How To Do Daily Maintenance for The Auger Filling Machine?

    Suggest take the jont sturcture auger filling machine as shanghai mooha auger filler,which can reduce much time.

    sure ,we also do some other steps as below.

    Before starting the machine every day, check whether there is any problem with the power supply of the automatic auger filling machine, and check whether the insulation layer outside the power supply is damaged or whether the cable plug has fallen out. After confirming that there are no problems, start the operation of the equipment. It is the maintenance of the automatic auger filling machine and the safety consideration of the operator himself. Add lubricating oil in time to make the machine run flexibly and reduce machine wear.

   Do a good job in equipment sanitation work, maintain the sanitation of the material contact parts, and let the operator pay more attention to whether the motor is running or not running smoothly when the motor is running. If there is any, stop working and start troubleshooting , And then start working again after the ending failure. let the motor a little lubricating oil every once in a while. If you work for a long time every day, the time interval should be smaller.

   This auger filling machne has not been used for a long time. the machine should be cleaned to avoid some residual materials from corroding the machine after using everyday. When the machine is running, the noise may be caused by insufficient gear oil or misalignment of the gears, which needs to be repaired in time.